
Motor Soft Starters
Three-phase motor soft-starter controller with local status and control interface.
- Three-phase motor soft-start controller
- Controlled motor starting for project-specific loads
- Local status/control interface
Motor Soft Starters
Three-phase motor soft-starter controller with local status and control interface.
Product features
- Three-phase motor soft-start controller
- Controlled motor starting for project-specific loads
- Local status/control interface
Applications
Motor-driven equipment. Share motor nameplate, supply voltage, duty cycle and site conditions for model-specific selection.
Selection & configuration
Match the exact ordering model to the supply, load and site conditions. Consult the model-specific technical data before choosing PV strings, motor equipment or battery settings.
Model rating table
↔ Scroll left or right on small screens to view every column. Focus the table region to use the arrow keys.
| Model | Rated power | Rated current | Overall W1×H1×D mm | Mounting W2×H2 mm | Mounting bolt | Net weight |
|---|---|---|---|---|---|---|
| HALS8-C-5 | 5.5 kW | 11 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-7 | 7.5 kW | 15 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-11 | 11 kW | 22 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-15 | 15 kW | 30 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-18 | 18.5 kW | 37 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-22 | 22 kW | 44 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-30 | 30 kW | 60 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-37 | 37 kW | 74 A | 145×270×158 | 132×250 | M6 | <3.5 kg |
| HALS8-C-45 | 45 kW | 90 A | 145×270×158 | 132×250 | M6 | <4 kg |
| HALS8-C-55 | 55 kW | 110 A | 145×270×158 | 132×250 | M6 | <4 kg |
| HALS8-C-75 | 75 kW | 150 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-90 | 90 kW | 180 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-115 | 115 kW | 230 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-132 | 132 kW | 264 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-160 | 160 kW | 320 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-185 | 185 kW | 370 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-200 | 200 kW | 400 A | 260×530×195 | 230×380 | M8 | <20 kg |
| HALS8-C-250 | 250 kW | 500 A | 290×564×242 | 260×460 | M8 | <23 kg |
| HALS8-C-280 | 280 kW | 560 A | 290×564×242 | 260×460 | M8 | <23 kg |
| HALS8-C-320 | 320 kW | 630 A | 290×564×242 | 260×460 | M8 | <23 kg |
| HALS8-C-400 | 400 kW | 800 A | 330×630×242 | 300×500 | M8 | <31 kg |
| HALS8-C-450 | 450 kW | 900 A | 400×666×242 | 370×525 | M8 | <40 kg |
| HALS8-C-500 | 500 kW | 1000 A | 400×666×242 | 370×525 | M8 | <40 kg |
| HALS8-C-600 | 600 kW | 1200 A | 400×666×242 | 370×525 | M8 | <40 kg |
HALS8-C general technical specification
| Applicable supply | AC 50 Hz; about 220 V, 400 V, 660 V and 1140 V; 5.5–600 kW |
|---|---|
| Control principle | DSP microcontroller with SCR phase-angle control of motor voltage and current for soft start and soft stop |
| Starting modes | Six modes including current-limit, voltage-ramp, kick plus current-limit, kick plus voltage, current-ramp, and dual closed-loop |
| Stopping modes | Voltage-ramp stop or freewheel |
| Programmable timing | Start and stop times are programmable; delayed start 0–9995 s with countdown (two-wire control) |
| Analog signals | 4–20 mA and 0–20 mA analog current signals |
| Communication | RS485 / Modbus; up to 64 starters on the bus; isolated RS485 module |
| HMI | LCD display of operating, programming and fault status (Chinese) |
| Ingress protection | IP20 (IP40 by agreement) |
| Ambient temperature | −30 to 55 °C |
| Humidity | 95% RH, no condensation or dripping |
| Standard | GB 14048.6-2008 (5.5–600 kW) |
Application & Selection
Motor-driven equipment. Share motor nameplate, supply voltage, duty cycle and site conditions for model-specific selection.
Technical document matching
Share the ordering model, motor nameplate and supply requirements to obtain the appropriate technical information.
Ask about this series






