Preventive maintenance for VFDs: aiming for zero failures in production time
Why prevention matters more than repair, what "zero failure" really means for drives on lifts and critical production lines, and how to plan inspections outside production time.

Like any equipment, a well-maintained frequency inverter rarely fails. The aim of a maintenance team is not just to repair faults quickly but to understand why they occur and prevent them.
What "zero failure" means
Zero failure does not mean a drive never develops a problem. It means the drive does not fail during production time, because potential faults are found and removed during planned, non-production time. For a lift, a fault during operation is not acceptable. On an important production line, a long stoppage causes major losses. Drives in these duties should be inspected and serviced outside production hours so that hidden faults are eliminated before they develop.
What prevention requires
- Technicians who know drives well enough to anticipate when and where problems are likely to appear.
- A record of operating hours, ambient conditions and past alarms for each drive.
- Planned replacement of wear parts such as fans and DC-bus capacitors.
- Regular cleaning, insulation testing and retightening of power connections.
Where to start
Use the maintenance checklist for daily and periodic tasks, the ageing components guide for repair work, and the fault code reference when an alarm appears. Hailing technical support can help plan service intervals for your drives.





